| PCI-ISA Slot/Extender/Riser card | PCI-ISA to PCI-ISA external card |
| PCI Express Slot/Extender/Riser card | PCI Express to PCI Express external card |
* PCI card plugged into connector figure
Attention:
1. Whole signals bus Test Socket/Converter/Extender maybe not 100% one to one(1:1)
convert, please check specification.
2. No matter how many Slot/Socket, PCI series only can use one Slot/Socket at a time.
3. All Converters/Test Socket/Riser card/Extender have Timing, Delay, Impedance,
Resistance Contact problem, so we can't guarantee can work100%.
4. External converter card, if occur unreliable, try to shorten the cable length will be more stable.
Slot/Extender/Riser card for PCI bus 120p slot x3 or x4
CV08P-R for Right angle/side insert Slot x 3, Add-on card's Component side up.
CV08P-RS for Right angle/side insert Slot x 3 and Stand type.insert Slot x 1.
CV08P-L for Left angle/side insert Slot x 3, Add-on card's Solder side up.
CV08P-LS for Left angle/side insert Slot x 3 and Stand type insert Slot x 1.
CV08P-PCB D.I.Y. PCB, easy to measure signal for Logic Analyzer and Oscilloscope.
 |
 |
| Slot/Extender/Riser card | |
| * Change or extend the Add-in card insert position, Form
Factor: 3U * Easy for Logic Analyzer and Oscilloscope to measure PCIe bus every pin signal. * The Gold fingers pin to pin(1 to 1) connect to slot, VDD-Power/VSS-Ground the common pin didn't connect with together. |
|
| 1. CV08Pv2-R(Right insert) | (Discontinued) |
| 2. CV08Pv2-L(Left insert) | (Discontinued) |
| 3. CV08Pv2-R(3V) | (Discontinued) |
| 4. CV08Pv2-L(3V) | (Discontinued) |
| 5. CV08Pv2-PCB | (Discontinued) |
06. CV08Pv3-R(Right insert) |
inquiry |
| 07. CV08Pv3-L(Left insert) | inquiry |
| 08. CV08Pv3-R(3V) | inquiry |
| 09. CV08Pv3-L(3V) | inquiry |
| 10. CV08Pv3-PCB | inquiry |
| Option: Add S-Stand/Top slot x1 | +S: Add Stand/Top-insert slot x1 |
| Option: Add L-slot or R-slot x3 | +R/+L: Add Right/Left-angle insert slot x3 |
| Option: Add PH=68p x2 Pin Head | +PH: Add Pin Head |
| Option: Half pitch twisted flat cable | inquiry |
| Option: Teflon flat cable | inquiry |
 |
 |
 |
 |
 |
|
 |
 |
| PCI to PCI external card | |
| * Change or extend the Add-in card insert
position. * Easy for Logic Analyzer and Oscilloscope to measure PCIe bus every pin signal. * The Gold fingers pin to pin(1 to 1) connect to slot, VDD-Power/VSS-Ground the common pin didn't connect with together. * with ATA-100 cable length= 45cm. |
|
| 1. CV09P-eRx3(PCI to external PCI) | inquiry |
| 2. CV09P-eRx3(3V) | inquiry |
| 3. CV09P-eLx3(PCI to external PCI) | inquiry |
| 4. CV09P-eLx3(3V) | inquiry |
| Option: Add S-Stand/Top slot x1 | +S: Add Stand/Top-insert slot x1 |
| Option: Add L-slot or R-slot x3 | +R/+L: Add Right/Left-angle insert slot x3 |
| Option: Add MP=Mini PCI socket | +MP: Add Mini PCI socket |
| 5. CV09P-e4in1 (PCI to external PCI/PC104/mPCI/cPCI) |
inquiry |
| 6. CV09P-e4in1(3vPCI) | inquiry |
(Left-insert) Left-angle/side slot x1, for Add-in card insert to Left slot(Solder side up).
(Right-insert) Right-angle/side slot x1, for Add-in card insert to Right slot(Component side up).
(Stand-insert) Stand type slot x1, for Add-in card insert to Top slot(No change position).
| Slot/Extender/Riser card | |
| * Change or extend the Add-in card insert position, Form
Factor: 2U. * Easy for Logic Analyzer and Oscilloscope to measure PCIe bus every pin signal. * The Gold fingers pin to pin(1 to 1) connect to slot, VDD-Power/VSS-Ground the common pin didn't connect with together. * with ATA-100 cable length= 45cm |
|
| 1. CV08PE1-Lx2(PCIe x1) | inquiry |
| 2. CV08PE4-Lx2(PCIe x4) | inquiry |
| 3. CV08PE8-Lx2(PCIe x8) | inquiry |
| 4. CV08PE16-Lx2(PCIe x16) | inquiry |
| Option: Add Stand/Top-insert PCI slot x1 | +S: Add Stand/Top-insert slot x1 |
| Option: Add Right-angle/insert PCI slot x1 | +R: Add Right-angle/insert slot x1 |
| Option: Add PH= Pin Head | +PH: Add Pin Head |
(Left-insert) Left-angle/side slot x1, for Add-in card insert to Left slot(Solder side up).
(Right-insert) Right-angle/side slot x1, for Add-in card insert to Right slot(Component side up).
(Stand-insert) Stand type slot x1, for Add-in card insert to Top slot(No change position).
| PCI Express to PCI Express external card | |
| * Change or extend the Add-in card insert
position. * Easy for Logic Analyzer and Oscilloscope to measure PCIe bus every pin signal. * The Gold fingers pin to pin(1 to 1) connect to slot, VDD-Power/VSS-Ground the common pin didn't connect with together. |
|
| 1. CV09PE-e1Lx2 | inquiry |
| 2. CV09PE-e1Lx2S | inquiry |
| 3. CV09PE-e4Lx2 | inquiry |
| 4. CV09PE-e4Lx2S | inquiry |
| 5. CV09PE-e8Lx2 | inquiry |
| 6. CV09PE-e8Lx2S | inquiry |
| 7. CV09PE-e16Lx2 | inquiry |
| 8. CV09PE-e16Lx2S | inquiry |
| Option: Add Stand/Top-insert PCI slot x1 | +S: Add Stand/Top-insert slot x1 |
| Option: Add Right-angle/insert PCI slot x1 | +R: Add Right-angle/insert slot x1 |
| Option: Half pitch twisted flat cable | inquiry |
| Option: Teflon flat cable | inquiry |
(Left-insert) Left-angle/side slot x1, for Add-in card insert to Left slot(Solder side up).
(Right-insert) Right-angle/side slot x1, for Add-in card insert to Right slot(Component side up).
(Stand-insert) Stand type slot x1, for Add-in card insert to Top slot(No change position).
| Home | Index |   |
Start: 26/09/1997 Update:10.04.2011