| PC/104-Plus and PC/104 series | Other PC/104 product |
* PCI card plugged into connector figure
Attention:
1. Whole signals bus Test Socket/Converter/Extender maybe not 100% one to one(1:1)
convert, please check specification.
2. No matter how many Slot/Socket, PCI series only can use one Slot/Socket at a time.
3. All Converters/Test Socket/Riser card/Extender have Timing, Delay, Impedance,
Resistance Contact problem, so we can't guarantee can work100%.
4. External converter card, if occur unstable, try to shorten the cable to better this status.
|
 |
| CV09P-104P(4 layout PCB) | (Discontinued) | PCI to PC/104-plus Converter |
| CV09P-104Pv2(2 layout PCB) | (Discontinued) | ver2 PCI to PC/104-plus Converter |
| CV09P-104Pv2.1(2 layout PCB) | ver2.1 PCI to PC/104-plus Converter | |
| Option: Add PH=68p x2 Pin Head | +PH: Add PH=136p Pin Head | |
| Option: Add PCI 3V or 5V Left-angle slot x1 | +PCI: Add PCI 3V or 5V Left-angle slot x1 | |
| Option: Add CP=CompactPci connector Male | +CP: Add CP=CompactPci connector Male | |
| Option: Add MP=Mini Pci socket | +MP: Add MP=Mini Pci socket | |
CV09P-104P PCI to PC/104-plus Converter
1. Can insert Converter card to DeskTop mother board to do PC/104P Add-on card testing.
2. PC/104P 120pin connector with standard pin(short pin).
3-1 CV09P-104P schematics: 09pm2pdf.PDF
3-2 CV09P-104Pv2 schematics: 09ex.pdf
3-3 CV09P-104Pv2.1 schematics:
|
|
|
 |
| CV09-104P-P-L(4 layout PCB) | (Discontinued) | PC/104-plus to PCI Converter |
| CV09-104P-P-Lv2(2 layout PCB) | (Discontinued) | ver2 PC/104-plus to PCI Converter |
| CV09-104P-P-Lv2.1(2 layout PCB) | ver2.1 PC/104-plus to PCI Converter | |
| Option: Add PH=68p x2 Pin Head | +PH: Add PH=136p Pin Head | |
| Option: Add PCI 3V or 5V Right-angle slot x1 | +PCI: Add PCI 3V or 5V Right-angle slot x1 | |
| Option: Add CP=CompactPci connector Male | +CP: Add CP=CompactPci connector Male | |
| Option: Add MP=Mini Pci socket | +MP: Add MP=Mini Pci socket | |
1. PC/104P 120pin connector with long pin(Length=12mm) and cover, in order to insert another
PC/104P connector.
2. PC/104P computer can use this Converter card to insert Debug card or other
PCI Add-on card for testing.
3-1 CV09-104P-P-L Converter card with 1pcs Left-insert/angle slot, Option: Right-insert slot x1.
3-2 CV09-104P-P-Lv2 Converter card with 1pcs Left-insert/angle slot.
3-3 CV09-104P-P-Lv2.1 Converter card with 1pcs Left-insert/angle slot.
4-1 CV09-104P-P-L schematics: 09pm2pdf.PDF
4-2 CV09-104P-P-Lv2 schematics: 09ex.pdf
4-3 CV09-104P-P-Lv2.1 schematics:
 |
 |
| 1. CV09P-e104P | PCI to external PC/104-plus Converter |
| 2. CV09-104P-e104P | PC/104-plus to external PC/104-plus Converter |
| Option: Add PH=136p Pin Head | +PH: Add PH=136p Pin Head |
| Option: Add PCI 3V or 5V slot x1 | +PCI: Add PCI 3V or 5V slot x1 |
| Option: Add MP=Mini Pci socket | +MP: Add MP=Mini Pci socket |
| Option: Add CP=CompactPci Male connector | +CP: Add CP=CompactPci Male connector |
| Option: Half pitch twisted flat cable | inquiry |
| Option: Teflon flat cable | inquiry |
| 3. CV09P-e4in1 | PCI to external PCI/PC104/mPCI/cPCI Converter |
| 4. CV09P-e4in1(3vPCI) | PCI to external PCI/PC104/mPCI/cPCI Converter |
1. CV09P-e104P, CV09-104P-e104P and CV09P-e4in1
with ATA-100 cable length= 45cm.
2. Schematics: 09p-mpv2.pdf, 09ex.pdf
PC/104-Plus to PCI Converter, PC/104 to ISA Converter
|
 |
 |
| CV09PC/104 | (Discontinued) | PC/104 to ISA Converter | |
| CV09PC/104v1.1 | PC/104 to ISA Converter | inquiry | |
| CV09PC/104P | PC/104P to PCI Converter | inquiry | |
| CV09PC/104P+I | (Discontinued) | PCI+ISA | |
| CV09PC/104P+Iv1.1 | PCI+ISA | inquiry | |
| Option:
PC/104(ISA) or PC/104P(PCI)
Add PH=68p x2 Pin Head |
+PH Add PH=68p x2 Pin Head | inquiry | |
CV09PC/104 PC/104 to ISA Converter(Discontinued)
CV09PC/104v1.1 PC/104 to ISA Converter
1. This Converter with standard type ISA 98p gold finger, and ISA 16bit(98p) slot x2.
2. LED inductor: +12V, - 12V, VCC(+5V), -5V, GND(GraND), RESET,
RDY(I/O check ReaDY).
3. PC/104(16bit) 64+40pin with long pin(Length=12mm) connector, in order to insert
another PC/104 connector.
4. PC/104 computer can use this Converter card to insert ISA 8/16bit Add-on card or
on mother board to test PC/104 Add-on card.
5. Schematics:
CV09PC/104P PC/104P to PCI Converter
1. This Converter with standard type PCI 120p gold finger, and PCI(120p) slot x2,
one routed to PCI device Slot#1, and another Slot#2, if mother board do not use
PCI device Slot#1 and Slot#2, can insert two pieces Add-on card in the same time.
2. LED inductor: +12V, - 12V, +5V, 3V, GND(GraND), RST(ReSet), FRAME.
3. PC/104P 120pin with long pin(Length=12mm) and cover, in order to insert
another PC/104P connector.
4. PC/104P computer can use this Converter card to insert PCI Add-on card or
on mother board to test PC/104P Add-on card.
5. Schematics:
CV09PC/104P+I(PCI+ISA) PC/104P+PC/104 to PCI+ISA Converter(Discontinued)
CV09PC/104P+Iv1.1(PCI+ISA) PC/104P+PC/104 to PCI+ISA Converter
1. this Converter is the combination of CV09PC/104Pv1.1(PCI) + CV09PC/104v1.1(ISA)
2. Schematics:
|
 |
| CV09PC/104v2 | Ver2 PC/104 to ISA Converter | inquiry |
| CV09PC/104v2+R | +R: Right-angle slot, component side up | inquiry |
| CV09PC/104Pv2 | Ver2 PC/104P to PCI Converter | inquiry |
| CV09PC/104Pv2+L | +L: Left-angle slot, solder part face up | inquiry |
| CV09PC/104Pv2+I | PCI+ISA | inquiry |
| Option: PC/104(ISA) or PC/104P(PCI) Add PH=68p x2 Pin Head |
+PH Add PH=68p x2 Pin Head | inquiry |
CV09PC/104v2 PC/104 to ISA Converter
1. This Converter with standard type ISA 8bit(62p) slot x2,
Option: ISA 8bit(62p) slot x1(Right-angle/insert slot, component side up).
2. LED inductor: +12V, - 12V, VCC(+5V), -5V, GND(GraND), RESET,
RDY(I/O check ReaDY).
3. PC/104(8bit) 64pin with long pin(Length=12mm) connector, in order to insert
another PC/104 connector.
4. PC/104 computer can use this Converter card to insert ISA 8bit Add-on card or
on mother board to test PC/104 Add-on card.
5. Schematics:
CV09PC/104Pv2 PC/104P to PCI Converter
1. This Converter with standard type PCI(120p) slot x2,
one routed to PCI device Slot#1, and another Slot#2, if mother board do not use
PCI device Slot#1 and Slot#2, can insert two pieces Add-on card in the same time.
Option: PCI(120p) slot x1(Left-angle/insert slot, solder side up).
2. LED inductor: +12V, - 12V, +5V, 3V, GND(GraND), RST(ReSet), FRAME.
3. PC/104P 120pin with long pin(Length=12mm) and cover, in order to insert
another PC/104P connector.
4. PC/104P computer can use this Converter card to insert PCI Add-on card or
on mother board to test PC/104P Add-on card.
5. Schematics:
CV09PC/104Pv2+I(PCI+ISA) PC/104P+PC/104 to PCI+ISA Converter
1. This Converter is the combination of CV09PC/104Pv2(PCI) + CV09PC/104v2(ISA).
2. Schematics:
|
 |
 |
 |
 |
 |
| CV09PC/104v3 | Ver3 PC/104 to ISA Converter | inquiry |
| CV09PC/104v3.1 | Ver3.1 PC/104 to ISA Converter | |
| CV09PC/104v3.2 | Ver3.2 ISA to PC/104 Converter | inquiry |
| CV09PC/104Pv3-S1(Slot#1) | Ver3 PC/104P to PCI Converter | inquiry |
| CV09PC/104Pv3-S2(Slot#2) or S3(Slot#3) or S4(Slot#4) | inquiry | |
| CV09PC/104Pv3.1-S2(Slot#2) | Ver3.1 PC/104P to PCI Converter | |
| CV09PC/104Pv3.1-S1(Slot#1) or S3(Slot#3) or S4(Slot#4) | ||
| CV09PC/104Pv3.2-S2(Slot#2) | Ver3.2 PC/104P to PCI Converter | inquiry |
| CV09PC/104Pv3.2-S1(Slot#1) or S3(Slot#3) or S4(Slot#4) | inquiry | |
CV09PC/104v3 PC/104 to ISA Converter
CV09PC/104v3.1 PC/104 to ISA Converter
1. this Converter with ISA 8bit(62p) slot x1(Left-angle/insert slot, solder side up).
2. LED inductor: +12V, - 12V, VCC(+5V), -5V, GND(GraND), RESET,
RDY(I/O check ReaDY).
3. PC/104(8bit) 64pin with long pin(Length=12mm) connector, in order to insert
another PC/104 connector.
4. PC/104 computer can use this Converter card, to insert ISA 8bit Add-on card.
5. Schematics:
CV09PC/104v3.2 ISA to PC/104 Converter
1. Personal Computer can use this Converter to test PC/104 Add-on card.
2. LED inductor: +12V, - 12V, VCC(+5V), -5V, GND(GraND), ReSeT,
RDY(I/O check ReaDY).
3. PC/104(8bit) 64pin with long pin(Length=12mm) connector, in order to insert
another PC/104 connector.
4. Schematics:
| CV09PC/104Pv3 PC/104P to PCI Converter(Right-insert slot) |
| CV09PC/104Pv3.1 PC/104P to PCI Converter(Right-insert slot) |
| CV09PC/104Pv3.2 PC/104P to PCI Converter(Left-insert slot) |
1-1 CV09PC/104Pv3 and v3.1
This Converter with PCI(120p) slot x1(Right-angle/insert slot, component side up).
1-2 CV09PC/104Pv3.2
This Converter with PCI(120p) slot x1(Left-angle/insert slot, solder side up).
1-3 With Slot#1, Slot#2, Slot#3, Slot#4 four types, if mother board do not use
PCI device Slot, can insert four pieces Add-on card in the same time.
2. LED inductor: +12V, - 12V, +5V, 3V, GND(GraND), RST(ReSet), FRAME.
3. PC/104P 120pin with long pin(Length=12mm) and cover, in order to insert
another PC/104P connector.
4. PC/104P computer can use this Converter card, to insert PCI Add-on card.
5. Schematics:
| Home | Index |   |
Start: 01/08/2002 Update: 07.23.2010
