* PCI card plugged into connector figure

Attention: 

1. Whole signals bus Test Socket/Converter/Extender maybe not 100% one to one(1:1) 

convert, please check specification.

2. No matter how many Slot/Socket, PCI series only can use one Slot/Socket at a time.

3. All Converters/Test Socket/Riser card/Extender have Timing, Delay, Impedance,

Resistance Contact  problem, so we can't  guarantee can work100%.

4. External converter card, if occur unstable, try to shorten the cable to be better this status.

	Zoom Photo+

1. Can insert Converter card to DeskTop mother board to do Compact PCI Add-on card testing.

2-1 CV09P-CP-L Converter card with 1pcs Left-angle/side slot, Option: Right-angle/side slot x1.

2-2 CV09P-CPv1.3  Option: Left-angle/side slot x1 or Right-angle/side slot x1.

2-3 CV09P-CPRv1.3 J1 use Right-angle connector,

Option: Left-angle/side slot x1 or Right-angle/side slot x1.

3-1 CV09P-CP-L Schematics: 09pcpdf.PDF

3-2 CV09P-CPv1.3 Schematics: 

3-2 CV09P-CPRv1.3 Schematics: 

4. If BIOS with support, can solder Arbiter chip and modify one PCI slot circuit to use 

two PCI slot in the same time.

1. CV09P-CPv2 and CV09P-CP-L with same functions, is 2 layout PCB and

reduce PCI slotx1 different from CV09P-CP-L.

2. CV09P-eCP and CV09P-e4in1with ATA-100 cable, length= 45cm

3. Schematics: 09p-mpv2.pdf, 09ex.pdf

Zoom Photo+

1. CompactPCI computer can use this Converter card, to insert Debug card or 

PCI Add-on card for testing.

2-1 CV09CP-P-R with 1pcs Right-angle/side slot, Option: Left-angle/side slot x1.

2-2 CV09CP-Pv3-RL with 1pcs Right-angle and 1pcs Left-angle/side Slot,

but only can use 1pcs PCI slot one time. 

2-3 CV09CP-Pv4-RL  

* With 1pcs Right-angle and 1pcs Left-angle/side Slot, can add +S Stand-side Slot,

but only can use 1pcs PCI slot one time. 

* LED inductor: CBE0, CBE1, CBE2, CBE3, RST, FRAME, TRDY, IRDY, 

3V, 5V,GND,+12V, -12V, VI/O, VI/OC, VI/OP, VI/OS.

3-1 CV09CP-P-R Schematics: 09pcpdf.PDF

3-2 CV09CP-Pv3-RL Schematics: 

3-3 CV09CP-Pv4-RL Schematics: 

4. If BIOS with support, can solder Arbiter chip and modify second PCI slot circuit to use 

two PCI slot in the same time.

CV09P-CP-PCB: D.I.Y. PCB, easy to measure signal for and Oscilloscope.

CV09CP-MP series: CompactPCI to Mini PCI/PCI Converter

Zoom Photo+

CV09CP1-P and CV09CP1-P(3V)

* Same functions with CV09CP-P-R, (3V)= with PCI 3V-slot.

CV09CP0-MP and CV09CP1-MP

P0= No PCI slot, P1= with PCI 5V-slot, MP= with Mini PCI socket.

CV09CP0-MP+3-5Vx1 and CV09CP0-MP+3-5Vx2

CV09CP1-MP+3-5Vx1 and CV09CP1-MP+3-5Vx2

1. If your motherboard CompactPCI bus not support DC 5V, can use this Converter to 

insert 5V Add-in card.

2. Firstly must make sure your motherboard CompactPCI bridge/Controller's chip support

5V I/O Tolerance, otherwise will be burn down.

3. P0= No PCI slot, P1= with PCI 5V-slot, MP= with Mini PCI socket.

4. 5Vx1= with one set of DC 3.3V to +5V(Vout), the maximum is 300mA/1.5W

5. 5Vx2= two DC 3.3V to +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W

6. Schematics: 09mx3p.PDF

CV09eCP-eCP CompactPCI to external CompactPci Converter

CV09CP-MPv2

1. Option: +MP, +SK2, +5Vx1, +5Vx2

2. If your motherboard Mini PCI bus not support DC +5V, can use this Converter to insert 5V Add-in card.

3. Please make sure motherboard Mini PCI bridge/Controller's chip support 5V I/O Tolerance,

otherwise will be burn down.

4. 5Vx1= with one set of DC 3.3V to +5V(Vout), the maximum is 300mA/1.5W

5. 5Vx2= two DC 3.3V to +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W

6. Schematics: 09ecp.pdf

CV09eCP-eP and CV09eCP-eP(3V)

1. external Compact PCI to PCI Converter.

2. (3V)= with PCI 3V-slot, ATA-100 cable length= 45cm

3. Option: +MP, +SK2, +5Vx1, +5Vx2

4. If your motherboard Mini PCI bus not support DC +5V, can use this Converter to insert 5V Add-in card.

5. Please make sure motherboard Mini PCI bridge/Controller's chip support 5V I/O Tolerance,

otherwise will be burn down.

6. 5Vx1= with one set of DC 3.3V to +5V(Vout), the maximum is 300mA/1.5W

7. 5Vx2= two DC 3.3V to +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W

8. Schematics: 09ecp.pdf, 09emp2.pdf

CV09eCP-eCP

1. external Compact PCI to Compact PCI Converter.

2. With ATA-100 cable length= 45cm

3. Option: +MP, +SK2, +5Vx1, +5Vx2

4. If your motherboard Mini PCI bus not support DC +5V, can use this Converter to insert 5V Add-in card.

5. Please make sure motherboard Mini PCI bridge/Controller's chip support 5V I/O Tolerance,

otherwise will be burn down.

6. 5Vx1= with one set of DC 3.3V to +5V(Vout), the maximum is 300mA/1.5W

7. 5Vx2= two DC 3.3V to +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W

8. Schematics: 09ecp.pdf

Zoom photo +	Zoom photo +
Zoom photo +

Home

Index

Start: 01/08/2002 Update: 04.22.2010