* PCI card plugged into connector figure

Mini PCI bus series
CV09MP-CP CV09MP-P CV09MP-Pv3 CV09MPv3-eMP CV09MPv4-P2
CV09eMP-P2v4 CV09eMP-eMP CV09P-MP

Attention:

1. Whole signals bus Test Socket/Converter/Extender maybe not 100% one to one(1:1)

convert, please check specification.

2. No matter how many Slot/Socket, PCI series only can use one Slot/Socket at a time.

3. All Converters/Test Socket/Riser card/Extender have Timing, Delay,Impedance,

Resistance Contactproblem,so we can't guarantee can work100%.

4. External converter card, if occur unreliable, try to shorten the cable length will be more stable.

CV09MP-CP Mini PCI to CompactPCI test socket

Click for larger Image

Zoom Photo+

CV09MP-CP Mini PCI to CompactPCI test socket

1. Easy to measure Mini PCI 124pin signal for Logic Analyzer and Oscilloscope.

2. Suit for NoteBook/Laptop Type III A/B Mini PCI specifications,

do Mini PCI to CompactPCI converter.

3. Schematics: 09m1pdf.PDF

CV09MP-CP-PCB D.I.Y. PCB, easy to measure signal for Logic Analyzer

and Oscilloscope.

CV09MP-P Mini PCI to PCI Converter

Click for larger image

Zoom photo +

 
 

 

CV09MP-P(Discontinued) Mini PCI to PCI Converter
CV09MP-Pv2(Discontinued) Mini PCI to PCI Converter
1. CV09MP-Pv1.3 Mini PCI to PCI Converter
2. CV09MP-Pv4(Discontinued) Mini PCI to PCI Converter
Option: Add Stand-insert PCI slot x1 +S

1. Suit for NoteBook/Laptop Type III A/B Mini PCI specifications.

2-1 CV09MP-P combine with two parts, with 1pcs Right-angle and

1pcs Left-angle/side Slot, but only can use 1pcs PCI slot one time.

2-2 CV09MP-Pv2 combine with two parts, with 1pcs Right-angle and

1pcs Left-angle/side Slot, but only can use 1pcs PCI slot one time.

The function samewith CV09MP-P, only the Slot position difference.

2-3 CV09MP-Pv1.3 combine with two parts, with 1pcs Right-angle and

1pcs Left-angle/side Slot, but only can use 1pcs PCI slot one time.

The function same withCV09MP-Pv2, only the Slot position difference.

2-4 CV09MP-Pv4

* Combine with two parts, with 1pcs Right-angle and 1pcs Left-angle/side Slot,

can add +S Stand-side Slot, but only can use 1pcs PCI slot one time.

* LED inductor : CBE0, CBE1, CBE2, CBE3, RST, FRAME, TRDY,IRDY,

3V, 5V,GND,+12V, -12V, VI/O, VI/OC, VI/OP, VI/OS.

3. NoteBook/Laptop computer can use this Converter card, to insert Debug card or

PCI Add-on card for testing.

4-1 CV09MP-P Schematics: 09m1pdf.PDF + 09pcpdf.PDF

4-2 CV09MP-Pv2 Schematics: 09m1pdf.PDF + 09pcpdf.PDF

4-3 CV09MP-Pv1.3 Schematics: 09m1pdf.PDF +

4-4 CV09MP-Pv4 Schematics: 09m1pdf.PDF +

5. If BIOS with support, can solder Arbiter chip and modify second PCI slot circuit to use

two PCI slot in the same time.

CV09MPv4-P2 series: Mini PCI to PCI Converter

* The AMP 124pin mPCI socket is 7.95 or 4.0mm height.

CV09MP-P1v2(Discontinued) ver2 Mini PCI to PCI+5V-slot Converter
CV09MP-P1v2(3V)(Discontinued) ver2 Mini PCI to PCI+3V-slot Converter
CV09MP-P2v2(Discontinued) ver2 Mini PCI to PCI+5V/+3V-slot Converter
CV09MP-P1v2+5Vx1(Discontinued) ver2 Mini PCI to PCI+5V-slot+3.3V to 5Vx1 Converter
CV09MP-P1v2+5Vx2(Discontinued) ver2 Mini PCI to PCI+5V-slot+3.3V to 5Vx2 Converter
CV09MP-P2v2+5Vx1(Discontinued) ver2 Mini PCI to PCI+5V/+3V-slot+3.3V to 5Vx1 Converter
CV09MP-P2v2+5Vx2(Discontinued) ver2 Mini PCI to PCI+5V/+3V-slot+3.3V to 5Vx2 Converter
1. CV09MPv4-P1 ver4 Mini PCI to PCI 5V-slot Converter
2. CV09MPv4-P1(3V) ver4 Mini PCI to PCI 3V-slot Converter
3. CV09MPv4-P2 ver4 Mini PCI to PCI 5V+3V-slot Converter
Option: Add PH=136p Pin Head +PH
Option: Add MP=Mini Pci socket +MP
Option: Add 5Vx1=3.3V to 5Vx1 +5Vx1
Option: Add 5Vx2=3.3V to 5Vx2 +5Vx2
4. CV09eMP-eP1v4 ver4 Mini PCI to external 5V-slot Pci Converter
5. CV09eMP-eP1v4(3V) ver4 Mini PCI to external 3V-slot Pci Converter
6. CV09eMP-eP2v4 ver4 Mini PCI to external 5V+3V-slot Pci Converter
Option: Add MP=Mini Pci socket +MP
Option: Add 5Vx1=3.3V to 5Vx1 +5Vx1
Option: Add 5Vx2=3.3V to 5Vx2 +5Vx2
Option: Half pitch twisted flat cable inquiry
Option: Teflon flat cable inquiry

CV09MPv4-P1 and CV09MPv4-P1(3V)

1. Suit for have large space motherboard (not for Notebook/Laptop Computer).

2. P1= one PCI slot, (3V)= with PCI 3V-slot.

CV09MPv4-P2

1. P2= PCI 5V+3V-slot, but only can use one PCI slot; the other versions are 5V-slot x2 and

3V-slot x2

5. If BIOS with support, can solder Arbiter chip and modify one PCI slot circuit to use

two PCI slot in the same time.

CV09MPv4-P1+5Vx1 and CV09MPv4-P1+5Vx2

CV09MPv4-P2+5Vx1 and CV09MPv4-P2+5Vx2

1. P1= one PCI slot, P2= PCI 5V+3V-slot

2. If your motherboard Mini PCI bus not support DC +5V, can use this Converter to insert 5V

Add-in card.

3. Please make sure motherboard Mini PCI bridge/Controller's chip support 5V I/O Tolerance,

otherwise will be burn down.

4. 5Vx1= with one set of DC 3.3V to +5V(Vout), the maximum is 300mA/1.5W

5. 5Vx2= two DC 3.3V to +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W

6. Schematics: 09mpv4.pdf

CV09eMP-eP1v4 and CV09eMP-eP1v4(3V) and CV09eMP-eP2v4

1. external Mini PCI to Mini PCI Converter, suit for NoteBook/Laptop Type III A/B Mini PCI

specifications.

2. P1= one PCI slot, P2= PCI 5V+3V-slot.

3. with ATA cable length= 45cm

* For external type converter card, to short the length of cable if unstable.

Option: or order different length of Flat cable to match buyer's request.

4. Option: +MP, +5Vx1, +5Vx2

5. If your motherboard Mini PCI bus not support DC +5V, can use this Converter to insert 5V

Add-in card.

6. Please make sure motherboard Mini PCI bridge/Controller's chip support 5V I/O Tolerance,

otherwise will be burn down.

7. 5Vx1= with one set of DC 3.3V to +5V(Vout), the maximum is 300mA/1.5W

8. 5Vx2= two DC 3.3V to +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W

9. Schematics:09mpv4.pdf

CV09MP-Pv3 series: Mini PCI to PCI Converter

Click for larger image

Zoom Photo +

* The AMP 124pin mPCI socket is 7.95 or 4.0mm height.

1. CV09MP-Pv3 ver3 Mini PCI to PCI+5V-slot Converter
2. CV09MP-Pv3(3V) ver3 Mini PCI to PCI+3V-slot Converter
Option: Add PH=136p Pin Head +PH
Option: Add MP=Mini Pci socket +MP
Option: Add SK2=(dual) mini pci SocKetx2 +SK2
Option: Add 5Vx1=3.3V to 5Vx1 +5Vx1
Option: Add 5Vx2=3.3V to 5Vx2 +5Vx2
3. CV09MPv3+MP+PH+5Vx2

CV09MP-Pv3 and CV09MP-Pv3(3V)

1. Suit for have large space motherboard (not for Notebook/Laptop Computer).

2. (3V)= with PCI 3V-slot.

3. Option: +PH, +MP, +SK2, +5Vx1, +5Vx2

4. If your motherboard Mini PCI bus not support DC +5V, can use this Converter to insert 5V

Add-in card.

5. Please make sure motherboard Mini PCI bridge/Controller's chip support 5V I/O Tolerance,

otherwise will be burn down.

6. 5Vx1= with one set of DC 3.3V to +5V(Vout), the maximum is 300mA/1.5W.

7. 5Vx2= two DC 3.3V to +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W.

8. Schematics:09emp2.pdf

9. +SK2= One Mini PCI bus(golden fingers) to Two(dual) Mini PCI socket.

CV09MPv3-eMP series: Mini PCI to external Mini Pci Converter

Click for larger image

Zoom photo +

* The AMP 124pin mPCI socket is 7.95 or 4.0mm height.

1. CV09MPv3-eMPv3 Mini PCI to external Mini Pci Converter
2. CV09MPv3-eP Mini PCI to external 5V-slot Pci Converter
3. CV09MPv3-eP(3V) Mini PCI to external 3V-slot Pci Converter
Option: eMPv3 Add P1=Pci slot x1 +P1
Option: eP Add MP=Mini Pci socket +MP
Option: eMPv3/eP Add SK2=(dual)mini pci SocKetx2 +SK2
Option: eMPv3/eP Add 5Vx1=3.3V to 5Vx1 +5Vx1
Option: eMPv3/eP Add 5Vx2=3.3V to 5Vx2 +5Vx2
Option: CV09MPv3 Add P1=Pci slot x1 +P1
Option: CV09MPv3 Add MP=Mini Pci socket +MP
Option: CV09MPv3 Add SK2=(dual) mini pci SocKetx2 +SK2
Option: CV09MPv3 Add 5Vx1=3.3V to 5Vx1 +5Vx1
Option: CV09MPv3 Add 5Vx2=3.3V to 5Vx2 +5Vx2
Option: Half pitch twisted flat cable inquiry
Option: Teflon flat cable inquiry
4. CV09MPv3+P1-eMPv3+P1+5Vx2

CV09MPv3-eMP

1. external Mini PCI to Mini PCI Converter, suit for have large space motherboard

(not for Notebook/Laptop Computer).

2. Option: +P1, +SK2, +5Vx1, +5Vx2

3. If your motherboard Mini PCI bus not support DC +5V, can use this Converter to insert 5V

Add-in card.

4. Please make sure motherboard Mini PCI bridge/Controller's chip support 5V I/O Tolerance,

otherwise will be burn down.

5. 5Vx1= with one set of DC 3.3V to +5V(Vout), the maximum is 300mA/1.5W

6. 5Vx2= two DC 3.3V to +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W

7. Schematics:09emp2.pdf

CV09MPv3-eP and CV09MPv3-eP(3V)

1. external Mini PCI to PCI Converter, suit for have large space motherboard

(not for Notebook/Laptop Computer).

2. (3V)= with PCI 3V-slot, ATA cable length= 45cm.

* For external type converter card, to short the length of cable if unstable.

Option: or order different length of Flat cable to match buyer's request.

3. Option: +PH, +MP, +SK2, +5Vx1, +5Vx2

4. If your motherboard Mini PCI bus not support DC +5V, can use this Converter to insert 5V

Add-in card.

5. Please make sure motherboard Mini PCI bridge/Controller's chip support 5V I/O Tolerance,

otherwise will be burn down.

6. 5Vx1= with one set of DC 3.3V to +5V(Vout), the maximum is 300mA/1.5W.

7. 5Vx2= two DC 3.3V to +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W.

8. Schematics:09emp2.pdf

9. +SK2= One Mini PCI bus(golden fingers) to Two(dual) Mini PCI socket.

CV09eMP-eMP series: Mini PCI to external Mini Pci Converter

Click for larger image

Zoom photo +

* The AMP 124pin mPCI socket is 7.95 or 4.0mm height.

1. CV09eMP=CV13MP-P
2. CV09eMP-eMP Mini PCI to external Mini Pci Converter
3. CV09eMP-eMPv3 Mini PCI to external Mini Pci Converter
4. CV09eMP-eP Mini PCI to external 5V-slot Pci Converter
5. CV09eMP-eP(3V) Mini PCI to external 3V-slot Pci Converter
Option: CV09eMP Add MP=Mini Pci socket +MP
Option: eP Add MP=Mini Pci socket +MP
Option: eP Add SK2=(dual) mini pci SocKetx2 +SK2
Option: eP Add 5Vx1=3.3V to 5Vx1 +5Vx1
Option: eP Add 5Vx2=3.3V to 5Vx2 +5Vx2
Option: Half pitch twisted flat cable inquiry
Option: Teflon flat cable inquiry

CV09eMP=CV13MP-P

1. With 1.27x2.54mm 132pin Pin Header, easy to measure Mini PCI 124pin signal for

Logic Analyzer and Oscilloscope.

2. Suit for NoteBook/Laptop Type III A/B Mini PCI specifications,

3. Schematics:09emp1.pdf

CV09eMP-eMP

1. external Mini PCI to Mini PCI Converter, suit for NoteBook/Laptop Type III A/B Mini PCI

specifications.

2. with ATA cable length= 45cm.

* For external type converter card, to short the length of cable if unstable.

Option: or order different length of Flat cable to match buyer's request.

3. Option: +MP, +SK2, +5Vx1, +5Vx2

4. If your motherboard Mini PCI bus not support DC +5V, can use this Converter to insert 5V

Add-in card.

5. Please make sure motherboard Mini PCI bridge/Controller's chip support 5V I/O Tolerance,

otherwise will be burn down.

6. 5Vx1= with one set of DC 3.3V to +5V(Vout), the maximum is 300mA/1.5W.

7. 5Vx2= two DC 3.3V to +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W.

8. Schematics:09emp1.pdf, 09emp2.pdf

9. +SK2= One Mini PCI bus(golden fingers) to Two(dual) Mini PCI socket.

CV09eMP-eP and CV09eMP-eP(3V)

1. external Mini PCI to PCI Converter, suit for NoteBook/Laptop Type III A/B Mini PCI

specifications,

2. (3V)= with PCI 3V-slot, ATA cable length= 45cm.

* For external type converter card, to short the length of cable if unstable.

Option: or order different length of Flat cable to match buyer's request.

3. Option: +MP, +SK2, +5Vx1, +5Vx2

4. If your motherboard Mini PCI bus not support DC +5V, can use this Converter to insert 5V

Add-in card.

5. Please make sure motherboard Mini PCI bridge/Controller's chip support 5V I/O Tolerance,

otherwise will be burn down.

6. 5Vx1= with one set of DC 3.3V to +5V(Vout), the maximum is 300mA/1.5W.

7. 5Vx2= two DC 3.3V to +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W.

8. Schematics:09emp1.pdf, 09emp2.pdf

9. +SK2= One Mini PCI bus(golden fingers) to Two(dual) Mini PCI socket.

Click for larger image

Zoom photo +

SK2(A)(Discontinued)

* The AMP 124pin mPCI socket is 7.95 or 4.0mm height.

SK2(A)(Discontinued)

SK2(A)v2(ODM version) with REQ#(pin 29) and GNT#(pin 30) Switch Solder Pads.

+SK2(A) or (B): When the BIOS supports, can be attached Arbiter chip, and modify the second circuit

Mini PCI socket, You can also use two Mini PCI socket.

Schematics:sk2.pdf

CV09P-MP PCI to Mini PCI Converter

Click for larger Image

Photo Zoom +

Click for larger Image

Photo Zoom +

* The AMP 124pin mPCI socket is 7.95 or 4.0mm height.

CV09P-MP(4 layout PCB)(Discontinued) PCI to Mini PCI Converter
1. CV09P-MPv2(2 layout PCB) ver2 PCI to Mini PCI Converter
2. CV09P-MPv3(2 layout PCB) ver3 PCI to Mini PCI Converter
3. CV09P-eMP PCI to external Mini PCI Converter
Option: Add PH=136p Pin Header +PH
Option: Add PCI 3V or 5V L-Slotx1 +PCI
Option: Add PC104P connector +PC104P
Option: Add CP=CompactPci connector Male +CP
Option: Half pitch twisted flat cable inquiry
Option: Teflon flat cable inquiry
4. CV09P-e4in1 PCI to external PCI/PC104/mPCI/cPCI Converter
5. CV09P-e4in1(3vPCI) PCI to external PCI/PC104/mPCI/cPCI Converter

1. Insert Converter card into Desktop motherboard, for Mini PCI Add-on card test,

can avoid to use NoteBook main board inconvenient.

2. Mini PCI Type III 124pin socket is 7.9mm height, and the 124pin socket position on

PCB with bare, easy to measure Mini PCI Add-on card Front/Back side signals.

3. CV09P-eMP and CV09P-e4in1 with ATA cable, length= 45cm.

* For external type converter card, to short the length of cable if unstable.

Option: or order different length of Flat cable to match buyer's request.

4. Option: +PH, +PCI, +PC104P, +CP

5. CV09P-MP schematics: 09pm1pdf.PDF

6. CV09P-MPv2 schematics: 09p-mpv2.pdf

7. CV09P-MPv3 schematics: 09ex.pdf

8. CV09P-eMP, CV09P-e4in1 schematics: 09p-mpv2.pdf, 09ex.pdf

Click for larger Image

Zoom Photo+

CV09P-MP-PCB: D.I.Y. PCB, easy to measure signal for Logic Analyzerand Oscilloscope. (Discontinued)


Home

Contact Us

Start: 01/08/2002 Update: 01.28.2021