* PCI card plugged into connector figure
Attention:
* Whole signals bus Test Socket/Converter not 100% one by one transfer,
please check specification.
* No matter how many Slot/Socket, PCI series only can use one Slot/Socket at a time.
CV08P-2S(5V): PCI-X bus insert 32bit 5V add-in card.
SH08P-64Sv2-5V: PCI-X bus insert 64bit 5V add-in card.
(PCI-X to PCI)PCI bus 3.3V to 5V adapter
1. If your motherboard's PCI Slot not support DC +5V(Vout), can insert DC +5V
Add-in card to our Converter with your motherboard, it's suitable for 32/64bit PCI bus
and PCI-X 66/100/133 Specification.
2. Firstly must make sure motherboard's PCI bridge/Controller chip
with +5V tolerant I/O buffers, otherwise motherboard will be burnt down.
3. The Converter's DC +5V(Vout) Supply Current: x1 is 300mA/1.5W;
x2 is 480mA/2.4W; x3 is 630mA/3.1W; over the maximum can not working.
4. If BIOS support, can add Arbiter chip for PCI bus 1 to 2 Slot.
Left-angle/side insert: Add-in card's solder side up.
Right-angle/side insert: Add-in card's component side up.
32bit PCI bus series: Schematics: 09p351.pdf, 09p352.pdf
| 1x.CV09P3-5VSx1 | Stand
type Stand insert Add-in card, with set of +5V(Vout) |
(Discontinued) |
| 2x.CV09P3-5VSx2 | Stand
type: Stand insert Add-in
card, two +5V(Vout) be connected in parallel |
(Discontinued) |
| 3x.CV09P3-5VLx1 | Left
type: Left side insert
Add-in card, with set of +5V(Vout) |
(Discontinued) |
| 4x.CV09P3-5VLx2 | Left
type: Left side insert
Add-in card, +5V(Vout) be connected in parallel |
(Discontinued) |
| 1. CV09P3-5VSv2x1 | Stand type: Stand insert Add-in card, with one set of +5V(Vout). |
Inquiry |
| 2. CV09P3-5VSv2x2 | Stand type: Stand
insert Add-in card, two
+5V(Vout)
be connected in parallel. |
Inquiry |
| 3. CV09P3-5VLv2x1 | Left type: Left
side insert Add-in card, with one set of +5V(Vout), Form Factor: 1U |
Inquiry |
| 4. CV09P3-5VLv2x2 | Left type: Left
side insert Add-in card, two +5V(Vout)
be connected in parallel, Form Factor: 1U |
Inquiry |
| 5. CV09P3-5VL2x1 | Left type x2: Left side insert Slot x2. If BIOS support, can add Arbiter chip for PCI bus 1 to 2 Slot, and one set of +5V(Vout), Form Factor: 1U |
Inquiry |
| 6. CV09P3-5VL2x2 | Left typex2: Left
side insert Slot x2, two +5V(Vout)
be connected in parallel, Form Factor: 1U |
Inquiry |
| 7. CV09P3-5VL2x3 | Left typex2: Left side insert Slot x2, three +5V(Vout)
be connected in parallel, Form Factor: 1U |
Inquiry |
| 8. CV09P3-5VR2x1 | Right typex2: Right side insert Slot x2. If BIOS support,
can add Arbiter chip for PCI bus 1 to 2 Slot, and one set of +5V(Vout), Form Factor: 1U |
Inquiry |
| 9. CV09P3-5VR2x2 | Right typex2: Right
side insert Slot x2, two
+5V(Vout)
be connected in parallel, Form Factor: 1U |
Inquiry |
| 10.CV09P3-5VR2x3 | Right typex2: Right
side insert Slot x2, three
+5V(Vout)
be connected in parallel, Form Factor: 1U |
Inquiry |
64bit and PCI-X bus series: Schematics: 09p353.pdf, 09p354.pdf
| 11. CV09PX3-5VSx1 | Stand type: Stand insert Add-in card, with one set of +5V(Vout) |
Inquiry |
| 12. CV09PX3-5VSx2 | Stand type: Stand insert Add-in card, two +5V(Vout) be connected in parallel |
Inquiry |
| 13. CV09PX3-5VSx3 | Stand type: Stand insert Add-in card, three +5V(Vout) be connected in parallel |
Inquiry |
| 11x. CV09PX3-5VSv2x1 | Stand type: Stand insert Add-in card, with one set of +5V(Vout) |
Inquiry |
| 12x. CV09PX3-5VSv2x2 | Stand type: Stand insert Add-in card, two +5V(Vout) be connected in parallel |
Inquiry |
| 13x. CV09PX3-5VSv2x3 | Stand type: Stand insert Add-in card, three +5V(Vout) be connected in parallel |
Inquiry |
| 14. CV09PX3-5VLx1 | Left type: Left
side insert Add-in card, with one set of +5V(Vout), Form Factor: 1U |
Inquiry |
| 15. CV09PX3-5VLx2 | Left type: Left side insert Add-in card, two +5V(Vout)
be connected in parallel, Form Factor: 1U |
Inquiry |
| 16. CV09PX3-5VLx3 | Left type: Left
side insert Add-in card, three +5V(Vout)
be connected in parallel, Form Factor: 1U |
Inquiry |
| 14x. CV09PX3-5Vv2Lx1 | Left type: Left
side insert Add-in card, with one set of +5V(Vout) |
|
| 15x. CV09PX3-5Vv2Lx2 | Left type: Left side insert Add-in card, two +5V(Vout) be connected in parallel |
|
| 16x. CV09PX3-5Vv2Lx3 | Left type: Left
side insert Add-in card, three +5V(Vout) be connected in parallel |
|
| 17. CV09PX3-5VL2x1 | Left type x2: Left
side insert Slot x2. If BIOS support,can add Arbiter chip for PCI bus 1 to 2 Slot, and one set of +5V(Vout), Form Factor: 1U |
Inquiry |
| 18. CV09PX3-5VL2x2 | Left type x2: Left
side insert Slot x2, two
+5V(Vout)
be connected in parallel, Form Factor: 1U |
Inquiry |
| 19. CV09PX3-5VL2x3 | Left type x2: Left
side insert Slot x2, three
+5V(Vout)
be connected in parallel, Form Factor: 1U |
Inquiry |
| 20. CV09PX3-5VR2x1 | Right type x2: Right
side insert Slot x2. If BIOS support,can add Arbiter chip for PCI bus 1 to 2 Slot, and one set of +5V(Vout), Form Factor: 1U |
Inquiry |
| 21. CV09PX3-5VR2x2 | Right type x2: Right
side insert Slot x2, two
+5V(Vout)
be connected in parallel, Form Factor: 1U |
Inquiry |
| 22. CV09PX3-5VR2x3 | Right type x2: Right side insert Slot x2, three +5V(Vout)
be connected in parallel, Form Factor: 1U |
Inquiry |
CV09MP3-5V Mini PCI Saver+3.3V to 5V adapter
1. If your motherboard Mini PCI bus not support DC 5V, can use our Converter to insert
5V Add-in card.
2. Firstly must make sure motherboard's Mini PCI bridge/Controller's chip support 5V
tolerant I/O, otherwise motherboard will be burn down.
4. DC 3.3V to +5V(Vout) the maximum is 300mA/1.5W.
3. The 124p through hole 1:1 to gold finger, easy to measure signal for Logic Analyzer and
Oscilloscope.
4. Schematics: 09mx11.PDF
| CV09CP0-MP+3-5Vx1 | CompactPCI to Mini PCI +3.3V to 5Vx1 Converter |
| CV09CP0-MP+3-5Vx2 | CompactPCI to Mini PCI +3.3V to 5Vx1 Converter |
| CV09CP1-MP+3-5Vx1 | CompactPCI to Mini PCI+5V-slot+3.3V to 5Vx1 Converter |
| CV09CP1-MP+3-5Vx2 | CompactPCI to Mini PCI+5V-slot+3.3V to 5Vx2 Converter |
1. If your motherboard CompactPCI bus not support DC 5V, can use our Converter to
insert 5V Add-in card.
2. Firstly must make sure motherboard's CompactPCI bridge/Controller's chip support
5V tolerant I/O, otherwise motherboard will be burn down.
3. 5Vx1= with one set of DC +5V(Vout), the maximum is 300mA/1.5W.
4. 5Vx2= two DC +5V(Vout) be connected in parallel, the maximum is 480mA/2.4W.
5. Schematics: 09mx3p.PDF
| Home | Index |   |
Start: 15/10/2003 Update: 04.22.2010