CV71P series PCI to ISA Bridge Card

* PCI card plugged into connector figure

PCI to ISA Bridge Kits	Reference Design Kit

1. PCI bus design different from ISA bus, pay attention to following for using PCI to ISA bridge card,

a. must to know the specification of the ISA Add-on card: I/O ports and Memory ports  

    and Slave/Master/DMA mode.

b. can Coding PCI CONFIGURATION REGISTERS.

c. can Programming Win/Linux or other System Driver.

d. can not guarantee the whole of ISA Add-on card execution 100%.

2. These PCI  to ISA bridge card (RDK) only, W83628F & W83629D chip support 

    please contact Winbond Electronics Corp.

3. if not the faults of quality control in our factory, these bridge cards can not return and refund.

4. PRODUCT INFORMATION: PCI TO ISA BRIDGE SET W83628F & W83629D

CV-71P PCI-to-ISA bridge card

Function Description:

1. If motherboard use Firmware Hub BIOS, doesn't support ISA bus BIOS, can use 

    PCI-to-ISA bridge card to convert PCI bus into ISA bus for Flash ROM/EPROM BIOS.

2. LED inductor: 3.3V, +5V, GND, RST(ReSeT), IORDY(I/O channel ReaDY), PRST(PCI ReSeT)

3. ISA IORDY signal pin header.

4. each DIP and PLCC 32pin ROM socket x1, for BIOS/Software engineer 

    to do BIOS Programming/Simulate/Modify.

CV71P+80H PCI-to-ISA bridge Card

Function Description:

* Except CV-71P functions,

1. add PCI bus full address 32 bit(A0-A31) I/O port 80H/180H/280H decoding

    for BIOS POST code display, will to know the problem of motherboard and then repair quickly.

CV71P-ISA PCI-to-ISA bridge Card

Function Description:

1. If motherboard doesn't support ISA bus, can use PCI-to-ISA bridge card 

    to convert PCI bus into ISA bus, must study W83628F & W83629D Datasheet  

    and write hardware/software program for yourself.

2. LED inductor: 3.3V, 5V, -5V,12V, -12V, GND, RST(ReSeT), IORDY(I/O channel ReaDY)

3. ISA IORDY signal pin header.

4. ISA 98Pin Slot Left side x1, Option: Right side slot x1.

5. Connect motherboard GPO20 and PC/PCI DMA(REQ# / GNT#) and SERIRQ signals 

    to PCI-to-ISA bridge card for ISA bus DMA function.

CV71P-ISA+80H PCI-to-ISA bridge card

Function Description:

* Except CV71P-ISA functions, 

1. add PCI bus full address 32 bit(A0-A31) I/O port 80H/180H/280H decoding

    for BIOS POST code display, will to know the problem of motherboard and then repair quickly.

2. PCI bus LED inductor: PRST, SERR, PAR (Option: FRAME, STOP, DEVSEL, IRDY, TRDY).

3. each DIP and PLCC 32pin ROM socket x1, for BIOS/Software engineer

    to do BIOS Programming/Simulate/Modify.

CV71PS-ISA+80H PCI-to-ISA bridge card

Function Description:

* Except CV71P-ISA+80H functions,

add Stand PCI Slot x1 to insert PCI bus Add-On card.

PRODUCT INFORMATION: PCI TO ISA BRIDGE SET W83628F & W83629D

1. If you are not a Firmware/Software/ Hardware engineer, please don't buy these bridge cards, 

   because you must to design the "W83628F & W83629D Device Program" for yourself.

2. We only sell the PCI-to-ISA bridge card, do not support any software and hardware.

3. The bridge card is to convert PCI bus into ISA bus, can't 100% guarantee the whole of  

   motherboard and ISA Add-On card can work, therefore we

Offer One company/One time/One piece Only the special price for sample test, 

but can't return and refund.

* Could modify BIOS port 80h(POST code decode address) to other port address,

example 80h+84h, each piece plus U$5.-

Start: 31/5/2000 Update: 05.04.2012