RTP-O1A PCI PARALLEL PRINTER CARD USER'S MANUAL

1) FEATURES

* MULTI-MODE COMPATIBLE (SPP, BPP, EPP, ECP)

* FAST DATA RATES UP TO 1.5 Mbytes/S

* CAN SUPPORT 16 BYTE FIFO

* ADDRESS MODE : PLUG & PLAY OR RE-MAP TO ISA ADDRESS 378H, 278H.

* SOFTWARE PROGRAMMABLE MODE SELECT

* BOARD'S INTERRUPT SELECT BY HARDWARE

2) HARDWARE DESCRIPTION

1ST PORT : CONTROL JUMPER -- JP1, JP2, P1

JP1 : FIRST PORT INTERRUPT SELECT. DEFAULT SETTING AT POSITION 1 (INTRA).

JP2 : SPECIAL PURPOSE FOR CONNECT PORT'S PIN (24).

VOLTAGE OUTPUT HARDWARE SELECT. DEFAULT SETTING AT EMPTY.

1&2 - FOR VOLTAGE +12V OUTPUT.

2&3 - FOR POWER GROUND.

P1 : FIRST PCI PARALLEL PRINTER PORT CONNECTOR.

3) SOFTWARE DESCRIPTION

* SOFTWARE DRIVER SUPPORT TO WINDOWS 95, WINDOWS 98, WINDOWS NT,

 WINDOWS 2OOO, LINUX SYSTEM AND DOS OPERATING SYSTEM (FILE/? FOR

DOS DRIVER SETTING).

4) INSTALLATION:

STEP 1. CHECK THE COMPUTER OPERATING SYSTEM AND SELECT SOFTWARE

 TO UNZIP THE ZIP FILE.

STEP 2. REMOVE THE HOST COMPUTER AC POWER LINE SUPPLY.

STEP 3. PLUG THE RTP-O1A ADAPTER INNTO THE MOTHER BOARD.

STEP 4. CONNECT THE PRINTER MACHINE OR RELATIVE MACHINE TO THE

RTP-O1A BOARD'S CONNECTOR.

STEP 5. PLUG AC POWER LINE TO THE HOST PC.

STEP 6. STEP BY STEP, FOLLOW WINDOW'S INSTRUCTION AND INSTALL THE

 DRIVERS TO WINDOWS OPERATING SYSTEM FROM UNZIP FILE.

Start: 1/18/2002 Update: 02.15.2011