RTP-O1B PCI DUAL PRINTER CARD USER'S MANUAL

1) FEATURES

* MULTI-MODE COMPATIBLE (SPP, BPP, EPP, ECP).

* FAST DATA RATES UP TO 1.5 Mbytes/S.

* CAN SUPPORT 16 BYTE FIFO.

* I/O ADDRESS SELECT BY SOFTWARE: PLUG & PLAY OR RE-MAP TO ISA

 ADDRESS 378H, 278H.

* BOARD'S INTERRUPT SELECT BY HARDWARE.

2) HARDWARE DESCRIPTION

JP1 : FOR BOARD'S INTERRUPT SELECT. 

DEFAULT SETTING AT POSITION 1 (INTRA).

1ST PORT : CONTROL JUMPER -- JP1, JP2, P1

JP2 : SPECIAL PURPOSE FOR CONNECT PORT'S PIN (24) VOLTAGE OUTPUT

 HARDWARE SELECT. DEFAULT SETTING AT EMPTY.

1&2 - FOR VOLTAGE +12V OUTPUT.

2&3 - FOR POWER GROUND.

P1 : FIRST PCI PARALLEL PRINTER PORT CONNECTOR.

2ND PORT : CONTROL JUMPER -- JP4, P2

JP4 : SPECIAL PURPOSE FOR CONNECT PORT'S PIN VOLTAGE OUTPUT

HARDWARE SELECT. DEFAULT SETTING AT EMPTY.

1&2 - FOR VOLTAGE +12V OUTPUT.

2&3 - FOR POWER GROUND.

P2 : SECOND PCI PARALLEL PRINTER PORT.

3) SOFTWARE DESCRIPTION

* SOFTWARE DRIVER SUPPORT TO WINDOWS 95, WINDOWS 98, WINDOWS NT,

WINDOWS 2OOO, LINUX SYSTEM AND DOS OPERATING SYSTEM(FILE/? FOR

DOS DRIVER SETTING).

4) INSTALLATION:

STEP 1. CHECK THE COMPUTER OPERATING SYSTEM AND SELECT SOFTWARE

TO UNZIP THE ZIP FILE.

STEP 2. REMOVE THE HOST COMPUTER AC POWER LINE SUPPLY.

STEP 3. PLUG THE RTP-O1B ADAPTER INTO THE MOTHER BOARD.

STEP 4. CONNECT THE PRINTER MACHINE OR RELATIVE MACHINE TO THE

RTP-O1B BOARD'S CONNECTOR.

STEP 5. PLUG AC POWER LINE TO THE HOST PC.

STEP 6. STEP BY STEP FOLLOW WINDOW'S INSTRUCTION AND INSTALL THE

DRIVERS TO WINDOWS OPERATING SYSTEM FROM UNZIP FILE.

Start: 1/18/2002 Update: 02.15.2011