RTP-O3A PCI DUAL SERIAL CARD USER'S MANUAL
1) FEATURES
* 16 BYTE TRANSMIT-RECEIVE FIFO (UART).
* PROGRAMMABLE BAUD RATE BY SOFTWARE.
* SERIAL'S OPERATING CLOCK SELECT BY HARDWARE. (SERIAL SPEED Max. UP
TO 1384KB/S, DEFAULT SETTING UP TO 115.2KB)
* ADDRESS MODE : PLUG & PLAY OR RE-MAP TO ISA ADDRESS 3F8H, 2F8H,
3E8H, 2E8H.
2) HARDWARE DESCRIPTION
JP3 : BOARD'S INTERRUPT SELECT. DEFAULT SETTING AT POSITION 1 (INTRA).
MK1 : SERIAL OPERATING FREQUENCY GROUP SELECT :
1&2 (FS) -- FIRST FREQUENCY GROUP SELECT.
2&3 (SS) -- SECOND FREQUENCY GROUP SELECT.
JK1 : FIRST SERIAL PORT CLOCK SELECT.
S1 : FIRST SERIAL PORT CONNECTER.
JK2 : SECOND SERIAL PORT CLOCK SELECT.
S2 : SECOND SERIAL PORT CONNECTER.
| MK1 | JK1,JK2 | DESCRIPTION (1xK:Max.=115.2KB/S) |
| 1&2 | 1K | DEFAULT (1xK = 1.84MHZ) |
| 2K | SELECTABLE (2xK = 3.68MHZ) | |
| 4K | SELECTABLE (4xK = 7.36MHZ) | |
| 12K | SELECTABLE (12xK = 21.O8MHZ) | |
| 2&3 | (2.75K) | SELECTABLE (2.75K = 5.O6MHZ) |
| (5.5K) | SELECTABLE (5.5K = 1O.1MHZ) | |
| (11K) | SELECTABLE (11K = 2O.2MHZ) |
3) SOFTWARE DESCRIPTION
* SOFTWARE DRIVER SUPPORT TO WINDOWS 95, WINDOWS 98, WINDOWS NT,
WINDOWS 2OOO, LINUX SYSTEM AND DOS OPERATING SYSTEM (FILE/? FOR
DOS DRIVER SETTING).
4) INSTALLATION:
STEP 1. CHECK THE COMPUTER OPERATING SYSTEM AND SELECT SOFTWARE
TO UNZIP THE ZIP FILE.
STEP 2. REMOVE THE HOST COMPUTER AC POWER LINE SUPPLY.
STEP 3. PLUG THE RTP-O3A ADAPTER INTO THE MOTHER BOARD.
STEP 4. CONNECT THE PRINTER MACHINE OR RELATIVE MACHINE TO THE
RTP-O3A BOARD'S CONNECTOR.
STEP 5. PLUG AC POWER LINE TO THE HOST PC.
STEP 6. STEP BY STEP, FOLLOW WINDOW'S INSTRUCTION AND INSTALL THE
DRIVERS TO WINDOWS OPERATING SYSTEM FROM UNZIP FILE.
| Home | IPC index |
|
Start: 1/18/2002 Update: 09.17.2009
